Hub You - Business

Testing Services
Testing services are well catered to by certain providers who've got their own specialties to boast of. If you are a business proprietor, you want to give your customers nothing but the best. So, it is always wise to partner with testing services providers that can be of service to you. Obviously, you've got a na

Careers In Modelling – How To Look Good
Careers in modelling – how to look good In modelling, your body is your most important asset. If you don’t look after your health and your looks, the telltale signs will be obvious to prospective agencies and employers and you’ll find it difficult breaking into the industry or progressing in your mode

Welding rods get no respect. Out in the field I've seen guys throwing 50lb. rod cans from the truck onto the ground, torching cans open diagonally, beating the wrong end open with a chipping hammer and every other conceivable tool, and leaving open rod cans out in the open.

Let's look at what's wrong with each…

First and foremost, ALWAYS open the "right" end of the can. Some cans and boxes even say "open other end", or "don't open this end", or "the other end moron!." (last one made up by me.) The reason you need to open the right end is because you can damage the flux coating. You want to open it on the side where the rod is bare for the stinger, or electrode holder. There's a lot less chance of damaging the flux that way. 7018 is very prone to flux damage while 6010 is a lot tougher.

Most guys out in the field aren't gonna' be thinking about the welding rods inside the can as they toss them from the truck to the ground. When the cans get manhandled the flux gets jarred loose on the welding rods inside. It's bad enough when the flux gets chipped

Packaging Services
Several companies specialize in providing packaging services that are sourced by manufacturers to deliver well packaged products to their consumers. The existence and usage of highly sophisticated packaging equipment for different kinds of products has made good quality packaging a must for all products that reac

ceivable tool, and leaving open rod cans out in the open.

Let's look at what's wrong with each…

Saving Time and Money by Estimating The Cost Of Construction
A contractor knows that creating an estimate is the first step in securing a job. The client will look at all of the estimates and choose the one that best suites his or her needs. Estimating a small home is pretty basic. An experienced estimator can look at the square footage of the home to be built and have a

nd", or "don't open this end", or "the other end moron!." (last one made up by me.) The reason you need to open the right end is because you can damage the flux coating. You want to open it on the side where the rod is bare for the stinger, or electrode holder. There's a lot less chance of damaging the flux that way. 7018 is very prone to flux damage while 6010 is a lot tougher.

Urban Wear Trends Mean Retail Profits
The urban wear market is picking up steam, as its appeal spreads beyond the confines of the urban market.Spreading due to the popularity of rap music, rap inspired video games, and films featuring rap artists, the urban wear market has been steadily rising.Many retailers have been trying to increase

bare for the stinger, or electrode holder. There's a lot less chance of damaging the flux that way. 7018 is very prone to flux damage while 6010 is a lot tougher.

Laser Cutting Services
If purchasing a laser cutting machine is too costly for you, seeking the help of laser cutting service providers is your best option. Laser cutting service providers make use of high precision, high-speed and high power laser cutting machines to cut wide variety of materials including metal, plastic, rubber, wood

nking about the welding rods inside the can as they toss them from the truck to the ground. When the cans get manhandled the flux gets jarred loose on the welding rods inside. It's bad enough when the flux gets chipped off the end of the rod, flux chipped from the middle and you can pretty much kiss that rod goodbye. It's worse, if you don't realize it's chipped because right in the middle of a good weld you'll suddenly be welding with no flux. No flux equals no shielding from the atmosphere, and that equals a garbage weld.

You can use a lot of different ways to open rod cans out in the field if you are careful. I've even used the P38 C ration can opener I had in the army.If you use an oxygen/acetylene torch you need to be real careful not to burn the flux on the rods inside.

You can open a rod can with a chipping hammer, but it's not advisable. You gotta' be sure and hit it just right, at the edge of the can. You should hit the edge with the hammer follow-through swinging away from the can, not striking down into the can at the top. (I'm sure the elec

HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.iadvice.info/article/2576/iadvice-The-Proper-Handling-of-Welding-Rods.html">The Proper Handling of Welding Rods</a>

BB link (for phorums):
[url=http://www.iadvice.info/article/2576/iadvice-The-Proper-Handling-of-Welding-Rods.html]The Proper Handling of Welding Rods[/url]

Could your business survive a natural disaster? This article discusses the issue of disaster recovery. Having a disaster recovery plan is imperative to the success of any business.

Women are taking control of their financial destinies and careers by starting and running their own business. Women owned business opportunities are often of the work-at-home type due to several reasons.

When not pursued diligently, past due accounts are among the leading contributors to serious cash flow issues that prevent businesses from paying their own bills, or forcing them to go out of business altogether. Businesses depend on earned revenue to thrive, it's essential to the life of the business.

Tags

Links

Hub You - The Proper Handling of Welding Rods

Related Articles: